How to repair matted carpet

Adding carpet is a simple way to add beauty and comfort to your living space. However, after years of wear and tear, it will eventually become madded. Although some matting is too severe to be reversed, some matted carpets can be repaire at home on your own!
First, vacuum your capert in order to remove any loose dirt and debris. Then put an ice cube over the more heavily damaged areas. Take a screwdriver and use to it as leverage to prop up the matted carpeting. Running a steam cleaner over the carpet and affected area is also a good aid in standing the carpet back up. Dry the carpet with a towel in a rubbing motion as to further fluff it.

How to Repair Carpet Seams

When a carpet is put down, it is done in a series of pieces that are fit together. After years of wear and tear, the seams between the pieces may come apart. When this happens, it is neccessary to fit and sew them back together.
To do this, first take the seam apart by running over the seam with a hot iron. This beaks down the adhesive bond.Now get a utility knife and a straight edge and cut along the carpet to forma new edge. Leave about a half inch gap.
Use a carpet stretching tool to connect the two edges of carpet. Bring the two edges together.
Now, using seam tape, adhere to two edges together (place the seam tape UNDER the carpet pieces). Use a hot iron to heat the tape. Keep continuous pressure on the new seam in order to allow the adhesive to dry.

How to Repair Damaged Carpets

We’ve all done it. Spilled a glass of red wine, tracked muddy shoes into the house, gave a child free reign of the arts and craft box. All resulting in the destruction of your carpet. But there’s hope for you yet! Depending on the severity of the ugly blotch you’ve just managed to put on your carpet, you may be able to fix it without spending hundreds, or even thousands of dollars on extensive carpet treatments.
For lesser damages, you may be able to give the carpet a ‘hair transplant’. Just like you do with your split ends at the hair salon, you can take a pair of manicure scissors and simply trim off the areas of carpet that are discolored or ruined. If the stain is soaked into the bottom of the carpet, of course this will not work! You would have to cut too deeply in the carpet to fix it.
Another method is to take carpet fibers from an unused area of the house, and gluing them  onto the stain. Just cut fibers from hidden or unused areas of the carpet such as in a closet and put a small dab of glue on it. Then simply adhere it to the carpet backing. Be very careful not to get the glue on undamaged areas of the carpet.
For the bigger carpet messes, it is better to get a replacement piece of carpet. If the carpet is a popular style, you can usually buy a piece from home improvement stores for a relatively low price. When cutting the replacement piece, it is important to cut it in circles because it will blend better with the carpet that is already put down.
You will need to get a stencil (or perhaps a circular plastic lid) in order to make the circles the same size. Lay your stencil on the ground and fasten it with a nail so that it wont move. Take a knife and trace around the edges of the lid. Remove that circle from the original carpet. Take the same stencil and place it on the replacement carpet and fasten like you did before. Trace the stencil with a knife. Now you should have two perfect and equal circles: one that is stained from the middle of your floor, and one clean one from the replacement carpet. You should also have a hole in your floor about the same size!
To adhere your replacement piece onto the hole in the floor, you need double sided adhesive. Remove the protective layer off of the adhesive and press it into the hole that you created. Also apply it onto the back of the replacement piece. Then simpley push the replacement piece into the hole. To make it blend better, rub or brush the edges where the orignal carpet and replacemnt piece meet. You will need to put significant weight such as a table or stack of books onto the newly attached area for several hours to ensure a tight stick!

How to repair loose carpet

After years of wear, you may notice that your carpet is loose or saggy in the middle. There is a way to fix it, however, but you may need a few extra hands!
You will need to rent a ‘knee knicker’ from a carpet repair center or home improment store. Use this carpet tool to pull the carpet tight and attach it to the outer perimeter of the room. Adjust the knobs on the knee knicker as need to that the prongs extend far enough to grab the carpet backing withought cutting any other material.
Start from an area of the carpet that is already attached tightly. Push the knee knicker into the carpet at about two inches from the wall. Press your knee into the padded part of the knee knicker to angle it towards the wall. This should stretch the carpet and get rid of the looseness. Then tuck the excess carpet under the baseboard.

How to repair matted carpet

Just moved your furniture around? Well you are probably seeing unsightly matted carpet where the furniture once once. You dont have to live with it though, this can be easily fixed wih nothing but an ice cube and a towel.

Take a handful of ice cubes and place them on the matted surface. After the ice cubes have melted, rub the area with a towel or cloth. This friction should help return the carpet to its regular density. Running a vacuum over the area once you are finished should further help raise the pile.

How to repair Carpet Yourself

Carpet is a great way to make a room more comfortable and cozy, while adding an aesthetic touch. However, after years of wear and tear, it becomes damaged and begins looking dirty and worn. With a little elbow grease, you can rerverse the signs of wear and revive your beloved carpet.

For prevalent damages to carpet, it is neccessary to get a matching piece of carpet to patch the damaged area. You can buy remnants from your local carpet dealer, or if you’re lucky, you have the leftovers from the original carpet installation. Using a coffee can or other circular object, cut about the damaged area of the carpet witha  utility knife. Then, using the same coffee can, cut a circle out of your new carpet. Adhere carpet tape to both the hole in the floor and the back of your new carpet. Now, simply adhere the new carpet to the hole in the floor and voila! You have given life to your old carpet.

How to stretch Carpet and Repair seams

If you notice that your carpet is looking saggy and splitting, you can fix it by stretching he carpet and repairing the seams. If you’re an avid do-it-yourselfer, then this should be no problem for you!

To glue the carpet seams, fully disattach the current seams so that you can see the backing. Apply carpet seam adhesive to the edges. Pull the carpet so that it meets the edge of the other section of carpet. Apply pressure to ensure a smooth fit and tight bond. Repeat for any other loose seams.

To stretch a carpet, pull the edges of the carpet away from the perimeter of the rooms with a pair of pliers. You should see the tack strips. Take a power stretcher and ajust it to the dimensions of your room. Place the stretcher next to the baseboard at the section of carpet that you’ve been fixing. The head of the stretcher should be about six to eight inches fromt he wall. Push down the lever so that the stretcher pulls the carpet and snaps it back into the tack strip. now cut of any left over carpet with  a utility knife and push the rest of the carpet under the baseboard. Repeat until the entire carpet is stretched.